, , , , , , , ,

Working on new Dog Head, update.

Starting the mold (mould) from the sculpture.
Finished the left eye and nose, then started the mould process. I was nervous at first, I always thought that the original sculpture would be trash if you didn’t make the mould just right (that’s for plaster moulds), but after the first layer was dry I was hooked. I think (cross fingers) that this will be a good first test and I can then start scaling up.

First pour of silicone
I will let it cure overnight and apply another coat of smooth-on 5050 in the morning. So far easy to work with and i like the pink on white I can see the high/strong and low/weak points.
20140318-100628

Second coat
Clem is waiting for the first mold pour before she approves anything, Clem is on the left.

20140318-100648

Third pour now with registration points, and dams to fill weak spots.
The ‘Clem Head’ is almost ready, I used scrap clay to make terraces around the eyes and nose areas (lots of detail low thickness). Registration pieces were cut from bits of foam insulation, but i will be using left over silicons bits in the future, the foam ripped holes and have escaped.

20140319-151442

I made a Mother mold
Mother mold made out of plaster, it’s a simple two part mold, next time I’ll make it lighter and maybe more sections. I didn’t put too much (none) thought into the back.

20140325-103329

De molding
Very excited about this part. After 4 days I wanted to see how the original sculpture would fare.

20140325-103319

The original came out trouble free. The original is made out of Plastilina clay and popped out without the use of any demoulding spray.

20140325-103339

Putting the parts together
Starting the casting process mother mold together with the silicone mold, and the an after thought backplate.

20140327-095111

The backplate, cork and elastic… will it work?

20140327-095120

After twirling the plastic mix (smooth-on) around for 7-14 minutes. I remove backplate and peek inside. This is my first time doing this so I have no idea if this is right…

20140325-091625

After demolding
I am so happy at this point. Sculpture (pink) original (white) and first cast (grey).

first_pour

It is late at night but i press on and make 7 castings. Clem Heads are ready to paint.

20140327-095103

The next morning Clem joins me and checks out the work, she even poses so i can do a comparison, thanks Clem.

20140325-091605

Update: The Giant Maggie head
I have a lot of work to do and can’t wait to get back to it. I have to finish the pieces for the May, Hive Gallery show first, and then it’s back to giant dog heads. Below is the incomplete Giant Dog head with coins for scale.

20140318-100702